Z85C3008PEC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.96mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z85C3008PEC Overview
This fits well into the 40-DIP (0.620, 15.75mm) package.A case of Tubeis provided.Through Holeis used to install this component.There is the potential for the device to supply 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.The termination count on it is [0].Make sure this device is set to 5V.40pins are on it in total.Operation is performed via the 40pins.A minimum working temperature of -40°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 100°Cis maintained in order to ensure continued operation.This electronic component belongs to the family of [0].Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.It is also possible to find TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOusing this device.The system is capable of achieving good efficiency when it operates at a frequency of 8MHz.The interface IC has 2serial I/O ports.
Z85C3008PEC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z85C3008PEC Applications
There are a lot of Zilog Z85C3008PEC Specialized Interface ICs applications.
- Avionics test equipment
- Automotive applications
- Audio/video switches
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- SONET/SDH and PDH Multiplexers
- Relay Replacement
- Industrial and process control systems
- Battery Powered Instruments
- nonfault-protected)
- Existing multiplexer applications (both fault-protected and