Z8523020VSG
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 20MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.86mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8523020VSG Overview
It is appropriate for the device to use the 44-LCC (J-Lead)package.This product comes in a Tube case.In this case, this component is installed in accordance with Surface Mount.It is possible to find devices that supply 4.5V~5.5V volts.Based on the [0], it is possible to locate related parts.There are 44 terminations on it.You should set this device to 5V.It contains a total of 44 pins.For operation, 44pins are used.The device is mounted by Surface Mount.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.By setting the value of 70°Cto the maximum, this ensures that the part will run consistently.Other Microprocessor ICsis the family of electronic components.An interface IC operates with a supply voltage of 5V.This device supports SERIAL IO/COMMUNICATION CONTROLLER, SERIALuPs/uCs/peripheral ICs.The device can deliver voltage at 5V.Using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.In order for it to perform properly, its output frequency should not exceed 20MHz.This interface IC has a total of 2 serial I/Os available for use.
Z8523020VSG Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8523020VSG Applications
There are a lot of Zilog Z8523020VSG Specialized Interface ICs applications.
- Multiplexers
- Cellular phones
- RGB switches
- Audio and video switching
- High-Voltage
- Medical/Industrial
- Digital Cross-Connects
- PCMCIA cards
- Mechanical reed relay replacement
- Audio signal routing