Z8523016VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Access Time | 16 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523016VSC Overview
The 44-LCC (J-Lead)package is a good fit for it.This product comes in a Tube case.This component is installed in the way of Surface Mount.There is the potential for the device to supply 4.5V~5.5V volts.Using the Z85230can help you find related parts.There are 44 terminations on it.Keep in mind that this device should be set to 5V.There are a total of 44 pins on it.Operation is performed through the 44pins.Surface Mountmounts it.The device must operate at a minimum working temperature of 0°Cin order to be reliable.As long as the maximum value is [0], the part runs consistently.Electronic components are of the Other Microprocessor ICsfamily.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/peripheral IC.At [0], it is capable of delivering voltage.With the use of this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.As long as the frequency is set to [0], the device is capable of achieving good efficiency.A serial interface IC has a total of 2I/Os.
Z8523016VSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z8523016VSC Applications
There are a lot of Zilog Z8523016VSC Specialized Interface ICs applications.
- Imaging
- Switching Systems
- Mechanical reed relay replacement
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Precision data acquisition
- Automatic test equipment
- Modems
- High speed data transmission line cards
- Battery Powered Instruments
- Avionics test equipment