Z8523016VEC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z85230 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Access Time | 16 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523016VEC Overview
It's a good fit for the 44-LCC (J-Lead) package.It comes in a Tube case.It is installed according to Surface Mount.A device capable of providing 4.5V~5.5V volts is available.On the basis of the [0], it is possible to find related parts.It consists of 44terminations.This device should be set to 5V.It contains a total of 44 pins.A device's operation is controlled by the 44pins.The mount is Surface Mount.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.When the value is set to [0], the part will run consistently.This electronic component belongs to the family of [0].The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As a result, it is capable of delivering voltage at 5V.With this device, you can also find [0].When operating at a frequency of [0], it is capable of achieving good performance.There are 2 serial I/Os available in the interface IC.
Z8523016VEC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z8523016VEC Applications
There are a lot of Zilog Z8523016VEC Specialized Interface ICs applications.
- Existing multiplexer applications (both fault-protected and
- Avionics and Military Systems
- Digital Cross-Connects
- Battery Powered Instruments
- Sample hold systems
- Routers
- T1/E1 Terminals
- (FTTH)
- Fault Tolerant Systems
- Voice over IP/DSL – Integrated Access Devices, Smart