Z84C4210PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 40 |
| Supplier Device Package | 40-PDIP |
| Published | 2001 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C42 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Access Time | 10 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Core Architecture | Z8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.75mm |
| Length | 52.325mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C4210PEC Overview
This fits nicely with the DIP package.The component is installed in the way indicated by Through Hole.The component applied in I/O Controlleris appropriate.Using the Z84C42can help you find related parts.In total, there are 40terminations.Make sure that this device is set to 5V.There are a total of 40 pins on it.A device's operation is controlled by the 40pins.This is mounted by Through Hole.In order to ensure reliability, the unit works at a minimum working temperature of [0].This value enables the part to run consistently with a maximum value of [0].The electronic components is from Other Microprocessor ICs family.An interface IC operates at a supply voltage of 5V.The uPs/uCs/Peripheral IC this device incoporates is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Electronic parts in the Z80series are included in this part.The device can deliver voltage at 5V volts.The system is capable of achieving good efficiency when it operates at a frequency of 10MHz.In the interface IC, there are 2 serial I/Os.The component is capable of supplying a voltage of [0].
Z84C4210PEC Features
It is based on Z84C42.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z84C4210PEC Applications
There are a lot of Zilog Z84C4210PEC Specialized Interface ICs applications.
- Existing multiplexer applications (both fault-protected and
- Microprocessor controlled systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH/SONET multiplexers
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- Sample-and-hold systems
- Medical/Industrial
- Optical Applications
- Video signal routing
- Power routing