Z84C4110PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 40 |
| Supplier Device Package | 40-PDIP |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C41 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Access Time | 10 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.75mm |
| Length | 52.325mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C4110PEC Overview
The PDIPpackage would be a good match for it.This component is installed in the way of Through Hole.This is appropriate for the component that is applied in I/O ControllerUsing the Z84C41can help you find related parts.The number of terminations is 40.Make sure that this device is set to 5V.It contains a total of 40 pins.Operation is performed through the 40pins.It is mounted on Through Hole.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.When the value is set to [0], the part will run consistently.This electronic component belongs to the family of [0].An interface IC operates at a supply voltage of 5V.In this device, there are SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs, uCs, or peripheral ICs.This electronic part is a member of Z80 series.The device is capable of delivering voltage at 5V.In operation at a frequency of [0], it is capable of achieving good efficiency.There are 2 serial I/Os available in the interface IC.Components can supply voltages as low as [0].
Z84C4110PEC Features
It is based on Z84C41.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z84C4110PEC Applications
There are a lot of Zilog Z84C4110PEC Specialized Interface ICs applications.
- (FTTH)
- Relay Replacement
- nonfault-protected)
- HDTV
- Microprocessor Controlled Analog Systems
- Cell phones
- Avionics test equipment
- Digital cross connects (DSX-1)
- DSLAMs
- Communication systems