Z80C3010VSG
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z80C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z80C3010VSG Overview
It fits well with the package [0].A case of Tubeis provided.This component is installed in the way of Surface Mount.The ability to supply 4.5V~5.5V volts is available with certain devices.It is possible to find related parts based on the Z80C30.In total, there are 44terminations.This device should be set to 5V.It contains a total of 44 pins.In order for the operation to be performed, the 44pins must be connected.In this case, it is mounted by Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.Electronic components from the family Other Microprocessor ICsare used.The interface IC conducts at a voltage of 5V.The uPs/uCs/Peripheral IC this device incoporates is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.The device is capable of delivering voltage at 5V.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.In order for the device to perform properly, its output frequency should not exceed 10MHz Hz.A serial interface IC has a total of 2I/Os.
Z80C3010VSG Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3010VSG Applications
There are a lot of Zilog Z80C3010VSG Specialized Interface ICs applications.
- PBXs
- High-Voltage
- PDAs
- ?Central office or PBX (Private Branch Exchange)
- Channelized and Unchannelized DS3 applications
- Precision data acquisition
- Existing multiplexer applications (both fault-protected and
- Microprocessor controlled systems
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- Routers