Z80C3008VSG
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z80C30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z80C3008VSG Overview
The 44-LCC (J-Lead)package is a good fit for this feature.The item is packaged in a Tube case.This component is installed in the way of Surface Mount.The device is capable of supplying 4.5V~5.5V volts.Based on the [0], related parts can be found.This termination has 44terminations.Make sure this device is set to 5V.It contains a total of 44 pins.Operation is carried out through the 44pins.The mount is Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.This electronic component belongs to the family of [0].It is designed to operate at 5V supply voltage, with the interface IC conducting at this voltage.This device consists of SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL UPs, UCs, or peripheral ICs.Voltage at 5Vcan be delivered by the device.It is also possible to find TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOusing this device.In order for it to perform properly, its output frequency should not exceed 8MHz.There are 2 serial I/Os available in the interface IC.
Z80C3008VSG Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3008VSG Applications
There are a lot of Zilog Z80C3008VSG Specialized Interface ICs applications.
- ?Digital access cross connects
- Modems
- Cross Connects
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Audio and video routing
- Relay Replacement
- nonfault-protected)
- Relay replacements
- USB 1.1 signal switching circuits
- Channel Banks