Z80C3008VSC
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z80C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
Z80C3008VSC Overview
This fits well into the 44-LCC (J-Lead) package.It comes in a case with a [0].The component has been installed according to the Surface Mountmethod.The device is capable of supplying voltages of 4.5V~5.5V volts.It is possible to find related parts based on the Z80C30.It contains 44terminations.Be sure to set the device to 5V.It contains a total of 44 pins.In order to operate, we use the 44pins.The unit is mounted on Surface Mount.It operates at a minimum working temperature of 0°C to ensure reliability.This value enables the part to run consistently with a maximum value of [0].There are electronic components in the Other Microprocessor ICs family.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.Using this device, you can also find [0].In order for it to perform properly, its output frequency should not exceed 8MHz.It has 2serial I/Os.
Z80C3008VSC Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3008VSC Applications
There are a lot of Zilog Z80C3008VSC Specialized Interface ICs applications.
- Low-Voltage
- E1 Network Equipment
- Cable Modem, Cable PC
- Audio/video switches
- Automatic test equipment
- Access Concentrators
- Battery Powered Systems
- RGB switches
- PBXs
- Avionics