Z16C3510VSG
| Parameters | |
|---|---|
| Data Rate | 5 Mbps |
| Address Bus Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 16 |
| Number of Serial I/Os | 2 |
| Number of DMA Channels | 4 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 24.2316mm |
| Width | 24.2316mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Packaging | Tube |
| Published | 1999 |
| Series | IUSC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GP I/OS; 10 X 19 FRAME STATUS FIFO; 32 BIT ADDRESSING CAPABILITY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z16C35 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | USB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 50mA |
Z16C3510VSG Overview
The 68-LCC (J-Lead)package is a good fit for it.This product comes in a Tube case.The component is installed in the way indicated by Surface Mount.It is possible to obtain devices that supply 4.75V~5.25V volts.On the basis of the [0], it is possible to find related parts.The termination count on it is [0].You should set this device to 5V.The device has a total of 68pins.Operation is performed through the 68pins.This is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].In order to maintain consistency, a maximum value of 70°Cis recommended.ICs used in interfaces are operated at a supply voltage of 5V.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.It belongs to the IUSC?series.As a result of using this device, TWO MODEM CONTROL I/OS USABLE AS GP I/OS; 10 X 19 FRAME STATUS FIFO; 32 BIT ADDRESSING CAPABILITYcan also be established.The output frequency should not exceed 10MHzfor optimal performance.There are 2 serial I/Os available in the interface IC.
Z16C3510VSG Features
It is based on Z16C35.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z16C3510VSG Applications
There are a lot of Zilog Z16C3510VSG Specialized Interface ICs applications.
- Power routing
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- High-Voltage
- Cellular phones
- Residential Gateways, Home Gateway/Router
- Voice over IP/DSL – Integrated Access Devices, Smart
- Medical Instrumentation
- Channel Banks
- Cell phones
- Industrial and process control systems