Z16C3010AEG
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Packaging | Tray |
| Published | 1998 |
| Series | USC® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | TIN |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z16C30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | Serial |
| Clock Frequency | 20MHz |
| Supply Current-Max | 50mA |
| Data Rate | 10 Mbps |
| Address Bus Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 16 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 8X86; 680X0 |
| Data Transfer Rate-Max | 1.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; BISYNC; EXT SYNC; BISYNC TRANSPARENT; NBIP |
| Data Encoding/Decoding Method | NRZ; NRZI-MARK; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER); DIFF BIPH-LEVEL |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z16C3010AEG Overview
It's a good fit for the 100-LQFP package.It is packaged in a Tray case.It is installed according to Surface Mount.The ability to supply 4.5V~5.5V volts is available with certain devices.Using the Z16C30can help you find related parts.The terminations on it are [0].Keep in mind that this device should be set to 5V.A total of 100pins are located on it.Operation is carried out through the 100pins.By [0], it is mounted.The device must operate at a minimum working temperature of -40°Cin order to be reliable.By setting the value of 105°Cto the maximum, this ensures that the part will run consistently.Other uPs/uCs/Peripheral ICsis the family of electronic components.An interface IC operates at a supply voltage of 5V.This electronic part is a member of USC? series.The device is capable of delivering voltage at 5V.For the output frequency to be effective, it should not exceed 20MHz.There are 2 serial I/Os available in the interface IC.
Z16C3010AEG Features
It is based on Z16C30.
Set the part at 5V volts
Number of Serial I/Os : 2
Z16C3010AEG Applications
There are a lot of Zilog Z16C3010AEG Specialized Interface ICs applications.
- Avionics and Military Systems
- USB 1.1 signal switching circuits
- ATM and Frame Relay Equipment
- Transmit and
- Compatible with 65 V DACs and ADCs such as
- New designs requiring multiplexer functions
- Microprocessor controlled systems
- Microprocessor Controlled Analog Systems
- Sample-and-hold systems
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,