XRP2526IDTR-1-F
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 80μA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 2 ms |
| Supply Current-Max (Isup) | 0.15mA |
| Turn-Off Delay Time | 22 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | SOIC |
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 900mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 2/5V |
XRP2526IDTR-1-F Overview
This package is included in SOIC.It contains 8 terminations.The LED driving board has a total of 1 functions.With a supply voltage of 5V, high efficiency is possible.8 pins are connected to it in total.Lighting drivers with 140MOhm resistance are used.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 2 channels to choose from.In this part, the power supply is set to 2/5V.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It can operate at 1.8V volts as well.In order to operate, it requires at most 0.15mA amps of supply current.
XRP2526IDTR-1-F Features
Supplied from 5V
Resistance of 140MOhm
2 channels
XRP2526IDTR-1-F Applications
There are a lot of Exar Corporation XRP2526IDTR-1-F Power Switches ICs applications.
- Hard Disk Drives
- Smart Phones, Feature Phones
- Hot-Swap Systems
- PDAs
- Hot Swap
- Storage Drives
- HDD, SSD
- USB3.1 Power Delivery
- Hot Swaps
- Hot Swap