XRP2526ID-2-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 900mA |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 900mA |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 80μA |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Turn On Delay Time | 2 ms |
| Supply Current-Max (Isup) | 0.1mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Fault Protection | Over Temperature, Reverse Current |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XRP2526ID-2-F Overview
You get it with the SOIC package.As of now, 2 channels are available.There are 8 terminations in total.A device's terminal position is DUAL.In total, there are 8 pins on it.High efficiency can be achieved when the supply voltage is 5V.During operation, 8 pins are used.A gadget like this is self-contained in Power Management Circuits.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is stable to operate at a temperature of 85°C°C at the maximum.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Hot Swap can operate at a maximum supply current of 0.1mA.Hot Swap is set to output 2 by default.Maximum supply voltage is 5.5VV.If necessary, it can work with a low supply voltage, such as 1.8VV.When operating criteria are met, the maximum output current is reduced to 900mA.Devices with 140MOhm resistance are available.
XRP2526ID-2-F Features
The terminal position of 8
XRP2526ID-2-F Applications
There are a lot of Exar Corporation XRP2526ID-2-F hot swap controllers applications.
- USB interface
- Loads
- Overcurrent protection
- Circuit breakers for high-side circuits
- Network switches
- Base station power distribution system
- Board or blade insertion into live backplanes
- Industrial computers and servers
- Telecommunications
- Power monitoring