XRP2526ID-1-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 900mA |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 900mA |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 80μA |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Turn On Delay Time | 2 ms |
| Supply Current-Max (Isup) | 0.15mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Fault Protection | Over Temperature, Reverse Current |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XRP2526ID-1-F Overview
There is a SOIC package that includes this.Currently, 2 channels can be accessed.This device has a total of 8 terminations.This device has a terminal position of DUAL.In total, it has 8 pins.High efficiency can be achieved by using 5V as supply voltage.Operating the device requires 8 pins.As far as Power Management Circuits is concerned, this gadget is self-contained.There is a Surface Mount axis pointing in the direction of the object.Stable operation is enabled by a maximum operating temperature of 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.There is a POWER SUPPLY SUPPORT CIRCUIT IC in this gadget, which is an analog IC.This device's maximum supply current is 0.15mA.As a default, it's set to output 2.A maximum supply voltage of 5.5VV can be handled by it.With a 1.8VV supply voltage, it can work as low as possible.In order to satisfy the operation criteria, the maximum output current must drop to 900mA.Devices have 140MOhm resistance.
XRP2526ID-1-F Features
The terminal position of 8
XRP2526ID-1-F Applications
There are a lot of Exar Corporation XRP2526ID-1-F hot swap controllers applications.
- Short-circuit protection in real time
- CompactPCI
- Circuit power protectors
- Overcurrent protection
- Solid state circuit breakers
- Undervoltage protection
- Industrial high-side switches
- Base station
- DC boost circuit
- USB interface