XRP2525ID-2-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 900mA |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 900mA |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 52μA |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Turn On Delay Time | 2 ms |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Fault Protection | Over Temperature, Reverse Current |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XRP2525ID-2-F Overview
You get it with the SOIC package.At the moment, 1 channels are accessible.The 8 terminations total to three.Device DUAL is in the terminal position.In total, there are 8 pins on it.With a supply voltage of 5V, high efficiency is possible.Hot-swappable device is necessary to use 8 pins in order to operate the device.The gadget in Power Management Circuits is self-contained.Surface Mount is its direction of movement.Operating at 85°C°C ensures stable performance.For reliability, it must work at a minimum temperature of -40°C degrees Celsius.This part is powered by a 2/5V-shaped power supply.Hot Swap uses an analog IC, in this case a POWER SUPPLY SUPPORT CIRCUIT.The default output is 1.There is a maximum supply voltage of 5.5VV that it can handle.Using low supply voltages, such as 1.8VV, is feasible.When operating criteria are met, the maximum output current is reduced to 900mA.140MOhm-resistance is one of the characteristics of the device.
XRP2525ID-2-F Features
The terminal position of 8
XRP2525ID-2-F Applications
There are a lot of Exar Corporation XRP2525ID-2-F hot swap controllers applications.
- Current monitoring
- Power supply hotswap & inrush control
- Data communication systems
- Comprehensive analog and digital capabilities
- Electric vehicle
- Power monitoring
- Base station
- Undervoltage protection
- Active current limit
- ISDN system