XR71211EHMTR-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 10 |
| Packaging | Cut Tape |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Output Type | Adjustable |
| Max Output Current | 3.5mA |
| Output Configuration | Positive |
| Current - Output | 1.5A |
| Max Output Voltage | 2.4V |
| Voltage - Output | 2.4V |
| Min Input Voltage | 1.4V |
| Frequency - Switching | 800kHz |
| Max Input Voltage | 2.625V |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 250mV |
| Min Output Voltage | 600mV |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
XR71211EHMTR-F Overview
Capsuled in the DFN package, the switching controller can be used for a wide range of applications. Packaging for the pmic consists of Cut Tape solid enclosures. With this function, you can deal with Adjustable dc switching's outputs (s). The switching controller is capable of switching at the 800kHz position. Total pins of switching converter are 10. The Surface Mount makes DC switcher suitable for most applications and prototypes. You should keep dc regulator at -40°C degrees or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. The maximum input voltage of this dc switcher is 2.625V, so users must limit the voltage accordingly. Ideally, it is suited for switching controllers with a 1.5A input. When it is working normally, it outputs a value of 2.4V. There must be a 1.4V supply voltage. A dc switcher can only produce an output current of 3.5mA. The switching converter can output 2.4V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 600mV. With this controller, the phase is 1.
XR71211EHMTR-F Features
Adjustable Outputs
Switching Frequency: 800kHz
XR71211EHMTR-F Applications
There are a lot of Exar Corporation XR71211EHMTR-F DC to DC converter applications.
- Electrical power transmission
- Die casting equipment
- Domestic water pumps
- Industrial controllers
- Sink circuits
- Surge protection circuits
- Network technology
- Refrigerators of central air conditioners
- Nuclear power plants
- Computed tomography (CT)