XR68M752IB49-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFBGA |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 49 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V OR 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 49 |
| JESD-30 Code | S-PBGA-B49 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 1.8/3.3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.97V |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 64MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 2 MBps |
| Communication Protocol | ASYNC, BIT |
| Height Seated (Max) | 1.18mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
XR68M752IB49-F Overview
Alternatively, UART can be purchased in the cost-effective TFBGA package.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.In its configuration, 49 terminations are used.The device operates at 3.3V voltage.Data is communicated via 2 serial I/Os.UART is a type of 49-pin integrated circuUART.A frequency of 64MHz is measured for this IC.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.Surface Mount is used for mounting it.85°C is the maximum temperature that it can operate at.If a power supply of 1.8/3.3V is available, electronic designers can use it with confidence.Additionally, it is capable of performing ALSO OPERATES AT 1.8V OR 2.5V SUPPLY.A minimum temperature of -40°C is required to operate it.In order to maintain normal operation, the supply voltage should be kept below 3.63V.A supply voltage greater than 2.97V ensures normal operation.
XR68M752IB49-F Features
2 serial I/Os
Clock frequency of 64MHz
Power supplies of 1.8/3.3V
ALSO OPERATES AT 1.8V OR 2.5V SUPPLY
XR68M752IB49-F Applications
There are a lot of Exar Corporation XR68M752IB49-F UARTs applications.
- Cellular data devices
- Universal PCI Bus Add-in Card
- Factory automation and process control
- Factory Automation and Process Controls
- Portable and battery operated devices
- Battery Operated Electronics
- GPS Systems
- Personal Digital Assistants
- Battery Operated Instruments
- Gaming Terminals