XR16L2751IM-F
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.25V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 8 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Supply Current-Max | 5mA |
| Address Bus Width | 4 |
| Protocol | RS232, RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 6.25Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.78125 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
XR16L2751IM-F Overview
UART is available in the cost-effective 48-TQFP package.Transmission is done through 2, DUART channels.As far as packaging is concerned, Tray is used.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.In its configuration, 48 terminations are used.For its operation, a voltage of 3.3V is provided as the supply voltage.As of right now, this electronic part is in a Active status.As a means of communicating data, there are 2 serial I/Os available.The mount can be accessed via the Surface Mount method.2.25V~5.5V supply voltage is required to operate it.There is 50MHz clock frequency measured on this IC.In some ways, it resembles Internal Oscillator, Timer/Counter.Operating at 85°C is its maximum temperature limit.A minimum temperature of -40°C is required to operate it.In total, there are 8 I/Os designed to transfer data.Supply currents above 5mA are acceptable.
XR16L2751IM-F Features
2 serial I/Os
Clock frequency of 50MHz
8 I/Os
XR16L2751IM-F Applications
There are a lot of MaxLinear, Inc. XR16L2751IM-F UARTs applications.
- Handheld Computers
- Portable Applications
- Factory Automation
- Point-of-Sale Systems
- Ethernet Network to Serial Ports
- Cellular Data
- Battery Operated Instruments
- Point-of- Sale Terminals
- Telecommunication Network Routers
- GPS Devices