XQ17V16VQ44N
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.51 |
| Subcategory | OTP ROMs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 3V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.1mA |
| Organization | 2MX8 |
| Output Characteristics | 3-STATE |
| Memory Width | 8 |
| Standby Current-Max | 0.001A |
| Memory Density | 16777216 bit |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
XQ17V16VQ44N Overview
The supply voltage of the device must be 3.3V in order to operate correctly.FPGA is possible to connect different functions on the 44 axis at different terminations.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.If the device needs to be supplied with power, then a minimum voltage of 3V is required.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at no higher than 225 degrees.There are 44 pins on it.In this memory, data is transmitted using the PARALLEL/SERIAL process.The memory chip is allowed to operate at a voltage that is no greater than 0.1mA.There is a set of 44 pins that are included with the part.Speaking of speed, this is a memory IC that can work at a 33MHz frequency.There is a COMMON configuration for the memory's I/O.In order to obtain the best performance, it is recommended to use a 3.3V power supply.In specific, it can be described as a form of OTP ROMs.
XQ17V16VQ44N Features
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
COMMON I/O equipped.
XQ17V16VQ44N Applications
There are a lot of Xilinx XQ17V16VQ44N applications of configuration proms for FPGAs.
- mainframes
- supercomputers
- DVD disk buffer
- Cache memory
- nonvolatile BIOS memory
- eDRAM
- personal computers
- eSRAM
- hard disk drive (HDD)
- graphics card