XQ17V16CC44M
| Parameters | |
|---|---|
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.32.00.51 |
| Subcategory | OTP ROMs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 3V |
| Memory Size | 2MB |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.1mA |
| Organization | 2MX8 |
| Output Characteristics | 3-STATE |
| Memory Width | 8 |
| Standby Current-Max | 0.001A |
| Memory Density | 16777216 bit |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.826mm |
| Length | 16.51mm |
| Width | 16.51mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 25 Weeks |
| Surface Mount | YES |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Number of Terminations | 44 |
XQ17V16CC44M Overview
FPGA is limFPGAed to 2MB bytes for the size of the data storage.There is a requirement that it is supplied with a voltage of 3.3V.With different functions, 44 terminations can be used.A maximum voltage of 3.6V can be applied to this memory device.If the device needs to be supplied with power, then a minimum voltage of 3V is required.The memory chip in question is a CONFIGURATION MEMORY memory chip.The temperature should be kept below NOT SPECIFIED in reflow soldering.Pins on it are 44-shaped.This memory transmit data in the PARALLEL/SERIAL process way.An operating voltage of 0.1mA is allowed for the memory chip.44 pins are set with the part.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 33MHz.The memory's I/O is configured as COMMON.Using a 3.3V power supply is recommended for best results.Memory belongs to the OTP ROMs family.There is a capability of operating it at temperatures as low as -55°C, which is extremely low.Memory should operate wMemoryh ambient temperature no higher than 125°C.
XQ17V16CC44M Features
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
COMMON I/O equipped.
XQ17V16CC44M Applications
There are a lot of Xilinx XQ17V16CC44M applications of configuration proms for FPGAs.
- multimedia computers
- telecommunications
- personal digital assistants
- mainframes
- workstations,
- servers
- main computer memory
- networks
- hard disk drive (HDD)
- embedded logic