XCF128XFTG64C
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-TBGA |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2005 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Voltage - Supply | 1.7V~2V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF128X |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 2V |
| Power Supplies | 1.81.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Programmable Type | In System Programmable |
| Memory Size | 128Mb |
| Memory Type | FLASH |
| Supply Current-Max | 0.053mA |
| Access Time | 85 ns |
| Organization | 8MX16 |
| Memory Width | 16 |
| Standby Current-Max | 0.000075A |
| Memory Density | 134217728 bit |
| Parallel/Serial | PARALLEL |
| Programming Voltage | 1.8V |
| Data Polling | NO |
| Toggle Bit | NO |
| Command User Interface | YES |
| Number of Sectors/Size | 4127 |
| Page Size | 4words |
| Ready/Busy | YES |
| Common Flash Interface | YES |
| Height Seated (Max) | 1.2mm |
| Length | 13mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
XCF128XFTG64C Overview
FPGA uses a neat 64-TBGA package.Packaging for the external use of Tray.-40°C~85°C-qualified.The In System Programmable programming language can be used to program it.With a voltage of 1.7V~2V, it is powered.Surface Mount is the mounting position of this memory device.Data storage is limited to a size of 128Mb bytes.You can search "XCF128X" for other related parts.Supply voltage 1.8V is required.64 terminations with different functions.FPGA is possible to use this memory device wFPGAh a maximum voltage of 2V.If the device needs to be supplied with power, then a minimum voltage of 1.7V is required.The reflow soldering process should be done at a temperature no higher than 260.In this case, it has 64 pins.In this memory, data is transmitted using the PARALLEL process.The memory chip operates at a voltage of no more than 0.053mA.In the package, you will find a set of 64 pins.The best power supply to use is a 1.81.8/3.3V power supply, which is highly recommended.Known as a FLASH memory.The switching controller works at a frequency of 50MHz.
XCF128XFTG64C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
PARALLEL processing.
FLASH memory
Frequency: 50MHz.
XCF128XFTG64C Applications
There are a lot of Xilinx Inc. XCF128XFTG64C applications of configuration proms for FPGAs.
- cell phones
- eDRAM
- servers
- workstations,
- Camcorders
- graphics card
- hard disk drive (HDD)
- nonvolatile BIOS memory
- Cache memory
- embedded logic