XCF04SVO20C
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*S |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Memory Size | 4Mb |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.01mA |
| Organization | 4MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Memory Density | 4194304 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.19mm |
| Length | 6.5024mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCF04SVO20C Overview
An interesting 20-TSSOP (0.173, 4.40mm Width) package is used.Packaging outside of Tube.Licensed to operate in -40°C~85°C.FPGA is programmable through In System Programmable.The voltage is 3V~3.6V.This memory device is mounted in Surface Mount.Currently, data storage can only store data up to 4Mb bytes.Other components related to "XCF*S" can also be found by searching the word.There is a requirement that it is supplied with a voltage of 3.3V.There are different functions that can be applied on the 20 axis when it comes to terminating.This memory device can be used with a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.An CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.There are 20 pins on it.SERIAL-process memory transmits data.The memory chip operates at a voltage of no more than 0.01mA.Parts include 20 pins.I think it's important to point out that this is a memory IC that has a 33MHz frequency that can be operated at.In order for the part to function safely and reliably as part of a circuit, 3.3V recommends that users apply 3.3V to the part prior to use in order to ensure that it will work properly.The type of Flash Memories it is is specific.
XCF04SVO20C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
XCF04SVO20C Applications
There are a lot of Xilinx Inc. XCF04SVO20C applications of configuration proms for FPGAs.
- eDRAM
- Cache memory
- main computer memory
- eSRAM
- networking
- telecommunications
- Camcorders
- mainframes
- graphics card
- personal digital assistants