XC7Z010-L1CLG400I
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2010 |
| Series | Zynq®-7000 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PL BLOCK OPERATES IN 0.97V TO 1.03V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 667MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PBGA-B400 |
| Interface | CAN, EBI/EMI, Ethernet, I2C, MMC, SD, SDIO, SPI, UART, USART, USB |
| Max Supply Voltage | 1.05V |
| Min Supply Voltage | 950mV |
| Number of I/O | 130 |
| RAM Size | 256KB |
| Core Processor | Dual ARM® Cortex®-A9 MPCore™ with CoreSight™ |
| Peripherals | DMA |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Architecture | MCU, FPGA |
| Core Architecture | ARM |
| Boundary Scan | YES |
| RAM (words) | 256000 |
| Primary Attributes | Artix™-7 FPGA, 28K Logic Cells |
| Number of Registers | 35200 |
| Bus Compatibility | CAN; ETHERNET; I2C; SPI; UART; USB |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
This SoC is built on Dual ARM? Cortex?-A9 MPCore? with CoreSight? core processor(s).
Based on the core processor(s) Dual ARM? Cortex?-A9 MPCore? with CoreSight?, this SoC is built.This system on a chip is packaged as 400-LFBGA, CSPBGA by the manufacturer.The SoC chip provides users with reliable performance because it is implemented with 256KB RAM.The internal architecture of this SoC design is based on the MCU, FPGA technique.A system on chip SoC of this type belongs to the Zynq?-7000 series.Typical operating temperatures for this SoC meaning should be -40°C~100°C TJ.A significant feature of this SoC security is the combination of Artix?-7 FPGA, 28K Logic Cells.A state-of-the-art Tray package houses this SoC system on a chip.An integral part of this SoC consists of a total of 130 I/Os.A 1V power supply is recommended.The system on a chip uses 400 terminations in total.A frequency of 667MHz is used by the wireless SoC to operate.In terms of core architecture, the SoC meaning relies on ARM.Furthermore, this SoC processor also incorporates additional features similar to PL BLOCK OPERATES IN 0.97V TO 1.03V SUPPLY which are available on other SoC processors also.Supply voltage is rated at 1.05V.The SoC security is powered at least by 950mV.
Dual ARM? Cortex?-A9 MPCore? with CoreSight? processor.
256KB RAM.
Built on MCU, FPGA.
Core Architecture: ARM
PL BLOCK OPERATES IN 0.97V TO 1.03V SUPPLY
There are a lot of Xilinx Inc.
XC7Z010-L1CLG400I System On Chip (SoC) applications.
- Microprocessors
- Industrial robot
- Body control module
- POS Terminals
- ARM support modules
- Automated sorting equipment
- Microcontroller
- Wireless sensor networks
- Avionics
- Sports