XC18V512VQG44C
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V512 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 64KX8 |
| Memory Width | 8 |
| Density | 512 kb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC18V512VQG44C Overview
There is a neat 44-TQFP package that is used in this program.Packaging for the external use of Tray.As a qualified employee, I can operate within 0°C~70°C.The In System Programmable programming language can be used to program it.The voltage fed to it is 3V~3.6V.Surface Mount is the orientation of this memory device.Search "XC18V512" for related parts.There is a requirement that it is supplied with a voltage of 3.3V.Different types of 44 terminations are available with different functions.FPGA is possible to use this memory device at a maximum voltage of 3.6V.There must be a minimum voltage of 3V to supply the device with the power it needs.Using CONFIGURATION MEMORY memory chips, this is what you get.If reflow soldering is being performed, the temperature should not be higher than 260 when soldering should be reflowed.FPGA has 44 pins.With the help of PARALLEL/SERIAL-processing, data is sent through this memory.For the memory chip to operate, it requires a voltage not exceeding 0.025mA.There is a set of 44 pins that are included with the part.There is a memory IC in this package that works at 33MHz frequencies.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.Specifically, It is a kind of Flash Memories.
XC18V512VQG44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V512VQG44C Applications
There are a lot of Xilinx Inc. XC18V512VQG44C applications of configuration proms for FPGAs.
- supercomputers
- DVD disk buffer
- embedded logic
- networking
- multimedia computers
- nonvolatile BIOS memory
- Camcorders
- printers
- main computer memory
- cell phones