XC18V01SO20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A001.B.1.A |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.71 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V01 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 128KX8 |
| Memory Width | 8 |
| Density | 1 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 10000 Write/Erase Cycles |
| Data Retention Time-Min | 10 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V01SO20I Overview
A neat 20-SOIC (0.295, 7.50mm Width) package is used.Packaging for external use.Qualified to operate within -40°C~85°C.With the help of In System Programmable, it can be programmed.With a voltage of 3V~3.6V, it is powered.Mounted in Surface Mount is this memory device.Try searching "XC18V01" for more parts.FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 20 terminations.This memory device can be used with a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 225.FPGA is equipped wFPGAh 20 pins.PARALLEL/SERIAL-process memory transmits data.A memory chip can operate at a voltage no greater than 0.025mA.Parts come with 20 pins.I would like to mention that this is a memory IC that will be able to work at a 33MHz frequency, so I will mention that.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.The type of Flash Memories it is is specific.
XC18V01SO20I Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V01SO20I Applications
There are a lot of Xilinx Inc. XC18V01SO20I applications of configuration proms for FPGAs.
- telecommunications
- Camcorders
- nonvolatile BIOS memory
- hard disk drive (HDD)
- graphics card
- multimedia computers
- networking
- supercomputers
- eSRAM
- cell phones