XC18V01PC20C
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V01 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 128KX8 |
| Memory Width | 8 |
| Density | 1 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V01PC20C Overview
20-LCC (J-Lead) is used in this package.Packaging for external use.A qualified individual to operate within 0°C~70°C is required.In System Programmable allows for programmability.A voltage of 3V~3.6V is applied to it.Surface Mount is the mounting position of this memory device.Other related parts can be found by searching "XC18V01".The supply voltage of the device must be 3.3V in order to operate correctly.With different functions, 20 terminations can be used.A maximum voltage of 3.6V can be applied to this memory device.Minimum voltage 3V is required for the device to work.The memory chip in question is a CONFIGURATION MEMORY memory chip.In reflow soldering procedure, the temperature should be controlled to no higher than 225.Pins on it are 20-shaped.PARALLEL/SERIAL-process memory transmits data.For the memory chip to operate, it requires a voltage not exceeding 0.025mA.Parts come with 20 pins.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 33MHz.The 3.3V company recommends that users apply 3.3V to a part before using it so the part will be able to run safely and reliably in a circuit.In more specific terms, it is a type of Flash Memories.
XC18V01PC20C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V01PC20C Applications
There are a lot of Xilinx Inc. XC18V01PC20C applications of configuration proms for FPGAs.
- Camcorders
- hard disk drive (HDD)
- supercomputers
- networks
- data buffer
- embedded logic
- personal computers
- printers
- workstations,
- graphics card