XC17V01SO20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17V01 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.015mA |
| Organization | 1MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Memory Density | 1048576 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17V01SO20C Overview
FPGA uses a neat 20-SOIC (0.295, 7.50mm Width) package.Packaging outside of Tube.Licensed to operate in 0°C~70°C.OTP is the program that allows it to be programmed.There is a voltage of 3V~3.6V applied to the device.There is a memory device mounted in Surface Mount.A maximum of 1Mb bytes of data can be stored.Try searching "XC17V01" for more parts.3.3V is the voltage it requires as a supply.Different functions can be assigned to 20 terminations.This memory device can be used with a maximum voltage of 3.6V.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The temperature should be kept below 225 in reflow soldering.FPGA has 20 pins.With the help of SERIAL-processing, data is sent through this memory.An operating voltage of 0.015mA is allowed for the memory chip.Parts come with 20 pins.There is a memory IC in this package that works at 15MHz frequencies.The memory's I/O is configured as COMMON.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.
XC17V01SO20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17V01SO20C Applications
There are a lot of Xilinx Inc. XC17V01SO20C applications of configuration proms for FPGAs.
- personal digital assistants
- multimedia computers
- hard disk drive (HDD)
- personal computers
- workstations,
- eDRAM
- graphics card
- data buffer
- nonvolatile BIOS memory
- networking