XC17V01PC20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17V01 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.015mA |
| Organization | 1MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Memory Density | 1048576 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17V01PC20C Overview
An interesting 20-LCC (J-Lead) package is used for this.Packaging for the external environment.In the state of 0°C~70°C, licensed to work.With the help of OTP, it can be programmed.There is a voltage of 3V~3.6V applied to the device.The memory device is mounted in Surface Mount.Data storage is limited to 1Mb bytes.To find other similar parts, search for "XC17V01".There is a voltage requirement of 3.3V for supplying it with power.Different functions can be assigned to 20 terminations.FPGA is possible to use this memory device at a maximum voltage of 3.6V.To supply the device, a minimum voltage of 3V is a must.An CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.The 20 pins are on the board.SERIAL-processing is used to transmit data through this memory using the SERIAL-processing algorithm.Memory chips can operate at a voltage no higher than 0.015mA.As part of the package, the part comes with a set of 20 pins.I would like to mention that this is a memory IC that will be able to work at a 15MHz frequency, so I will mention that.In the memory, the I/O configuration has been set to COMMON.The best power supply to use is a 3.3V power supply, which is highly recommended.
XC17V01PC20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17V01PC20C Applications
There are a lot of Xilinx Inc. XC17V01PC20C applications of configuration proms for FPGAs.
- mainframes
- personal digital assistants
- graphics card
- networks
- Cache memory
- cell phones
- servers
- multimedia computers
- telecommunications
- personal computers