XC17S40SO20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | XC17S40 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 400kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 329312X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 329312 bit |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S40SO20I Overview
An interesting 20-SOIC (0.295, 7.50mm Width) package is used.Packaging for the external use of Tube.A qualified individual who has the ability to operate within -40°C~85°C.The OTP programming language can be used to program it.An electric current of 4.5V~5.5V is applied to it.Mounted in Surface Mount is this memory device.A maximum of 400kb bytes of data can be stored.Other components related to "XC17S40" can also be found by searching the word.There is a voltage requirement of 5V for supplying it with power.With different functions, 20 terminations can be used.In order to use this memory device, a maximum voltage of 5.5V should be used.Minimum voltage 4.5V is required for the device to work.A MEMORY CIRCUIT memory chip like this is used for data storage.The 20 pins are on the board.The memory chip is allowed to operate from a voltage no higher than 0.01mA.20 pins are set with the part.FPGA is a 10MHz-frequency memory IC.A COMMON configuration is used for the memory's I/O.In order to obtain the best performance, it is recommended to use a 5V power supply.
XC17S40SO20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S40SO20I Applications
There are a lot of Xilinx Inc. XC17S40SO20I applications of configuration proms for FPGAs.
- printers
- cell phones
- nonvolatile BIOS memory
- hard disk drive (HDD)
- Cache memory
- personal computers
- supercomputers
- main computer memory
- workstations,
- multimedia computers