XC17S40SO20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | XC17S40 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 400kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 329312X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 329312 bit |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S40SO20C Overview
This package makes use of the 20-SOIC (0.295, 7.50mm Width) programming language.The external packaging of Tube is made of Tube plastic.In the state of 0°C~70°C, licensed to work.This device can be programmed using OTP.A voltage of 4.75V~5.25V is applied to it.Surface Mount is the mounting position of this memory device.There is a limit of 400kb MB for the amount of data that can be stored.For other related parts, search "XC17S40".The supply voltage should be 5V.FPGA is possible to connect different functions on the 20 axis at different terminations.In order to use this memory device, a maximum voltage of 5.25V should be used.It is necessary to supply the device with a minimum voltage of 4.75V.Using the MEMORY CIRCUIT memory chip, we can store data.20 pins are located on the board.A memory chip can operate at a voltage no greater than 0.01mA.20 pins are set with the part.Using a 10MHz frequency, this memory IC can work at high speeds.The memory's I/O is configured as COMMON.The use of a 5V power supply is recommended in order to achieve best results.
XC17S40SO20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S40SO20C Applications
There are a lot of Xilinx Inc. XC17S40SO20C applications of configuration proms for FPGAs.
- eDRAM
- supercomputers
- multimedia computers
- networking
- graphics card
- nonvolatile BIOS memory
- personal digital assistants
- DVD disk buffer
- networks
- telecommunications