XC17S20PD8I
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | XC17S20 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 200kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17S20PD8I Overview
FPGA uses a nice 8-DIP (0.300, 7.62mm) package that makes FPGA easy to use.External packaging of type Tube.-40°C~85°C license holder.This device can be programmed using OTP.FPGA is powered by a voltage which is 4.5V~5.5V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Through Hole.Data storage is limited to a size of 200kb bytes.Look for "XC17S20" for other related parts.Supply voltage 5V is required.There are different functions that can be applied on the 8 axis when it comes to terminating.This memory device can be used with a maximum voltage of 5.5V.An operating voltage of 4.5V is required in order to supply the device.An example of a MEMORY CIRCUIT memory chip can be seen in the picture below.In this case, it has 8 pins.An operating voltage of 0.01mA is allowed for the memory chip.Parts come with 8 pins.I would like to mention that this is a memory IC that will be able to work at a 10MHz frequency, so I will mention that.A COMMON configuration is used for the memory's I/O.The use of a 5V power supply is recommended in order to achieve best results.
XC17S20PD8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S20PD8I Applications
There are a lot of Xilinx Inc. XC17S20PD8I applications of configuration proms for FPGAs.
- Cache memory
- embedded logic
- nonvolatile BIOS memory
- personal computers
- multimedia computers
- cell phones
- data buffer
- DVD disk buffer
- eDRAM
- main computer memory