XC17S10PD8I
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | XC17S10 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 100kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 95008X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 95008 bit |
| I/O Type | COMMON |
| Memory IC Type | MEMORY CIRCUIT |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
XC17S10PD8I Overview
An interesting 8-DIP (0.300, 7.62mm) package is used.The external packaging of Tube is made of Tube plastic.A qualified individual who has the ability to operate within -40°C~85°C.Through OTP, it is programmable.FPGA is powered by a voltage which is 4.5V~5.5V volts, and this voltage is the voltage from which the generator is powered.Mounted in Through Hole is this memory device.Currently, data storage can only store data up to 100kb bytes.Other components related to "XC17S10" can also be found by searching the word.There is a requirement that it is supplied with a voltage of 5V.A termination with different functions in the 8 axis.FPGA is possible to use this memory device wFPGAh a maximum voltage of 5.5V.4.5V is the minimum voltage required to supply the device.FPGA is a MEMORY CIRCUIT memory chip that we are talking about here.For the memory chip to operate, it requires a voltage not exceeding 0.01mA.There is a set of 8 pins that are included with the part.When it comes to speed, this is a memory IC that can work at a frequency of 10MHz, which is very fast.There is a COMMON configuration for the memory's I/O.Memory is recommended that a 5V power supply be used.
XC17S10PD8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
MEMORY CIRCUIT memory IC.
COMMON I/O equipped.
XC17S10PD8I Applications
There are a lot of Xilinx Inc. XC17S10PD8I applications of configuration proms for FPGAs.
- personal computers
- eSRAM
- data buffer
- Camcorders
- DVD disk buffer
- servers
- embedded logic
- networks
- nonvolatile BIOS memory
- multimedia computers