XC1765ELPD8C
| Parameters | |
|---|---|
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765EL |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 2.5MHz |
| Supply Current-Max | 0.005mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
XC1765ELPD8C Overview
FPGA uses a neat 8-DIP (0.300, 7.62mm) package.Packaging for Tube.Qualified to operate within 0°C~70°C.This device can be programmed using OTP.With a voltage of 3V~3.6V, it is powered.The memory device is mounted in the Through Hole position.Data storage is limited to a size of 65kb bytes.Other related parts can be found by searching "XC1765EL".There is a voltage requirement of 3.3V for supplying it with power.Different functions are associated with 8 terminations.A maximum voltage of 3.6V can be applied to this memory device.An operating voltage of 3V is required in order to supply the device.This is a CONFIGURATION MEMORY memory chip.The reflow soldering process should be done at a temperature no higher than 225.The 8 pins are on the board.Data is transmitted in this memory using a SERIAL process.An operating voltage of 0.005mA is allowed for the memory chip.The part comes with a set of 8 pins.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 2.5MHz.This memory has a COMMON configuration for its I/O.Memory is recommended that a 3.3V power supply be used.For better customer service, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is added.
XC1765ELPD8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765ELPD8C Applications
There are a lot of Xilinx Inc. XC1765ELPD8C applications of configuration proms for FPGAs.
- graphics card
- main computer memory
- mainframes
- Cache memory
- telecommunications
- personal computers
- cell phones
- personal digital assistants
- hard disk drive (HDD)
- data buffer