XC17128EPC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17128E |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 128kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Organization | 128KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 131072 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17128EPC20I Overview
There is a neat 20-LCC (J-Lead) package that is used in this program.Packaging for the external environment.An individual who is qualified to operate within the -40°C~85°C domain.Using OTP, you can program it.An electric current of 4.5V~5.5V is applied to it.The memory device is mounted in Surface Mount.The size of data storage is limited to 128kb.To find other similar parts, search for "XC17128E".The supply voltage is 5V.There are different functions associated with 20 terminations.As long as the maximum voltage of the memory device is 5.5V, then the memory device can be used.There must be a minimum voltage of 4.5V to supply the device with the power it needs.A CONFIGURATION MEMORY memory chip is shown here.Reflow soldering should be done at no higher than 225 degrees.Pins on it are 20-shaped.Through SERIAL-processing, data is transmitted from this memory to the CPU.An operating voltage of 0.01mA is allowed for the memory chip.In the package, you will find a set of 20 pins.I would like to mention that this is a memory IC that will be able to work at a 15MHz frequency, so I will mention that.This memory has a COMMON configuration for its I/O.Memory is recommended that a 5V power supply be used.Thus, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included to better serve customers.
XC17128EPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17128EPC20I Applications
There are a lot of Xilinx Inc. XC17128EPC20I applications of configuration proms for FPGAs.
- networking
- networks
- Cache memory
- graphics card
- workstations,
- mainframes
- eDRAM
- nonvolatile BIOS memory
- supercomputers
- multimedia computers