VNS1NV04DP-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS1N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 45V |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 1.7A |
| Drain to Source Voltage (Vdss) | 45V |
| Turn-Off Delay Time | 350 ns |
| Continuous Drain Current (ID) | 1.7A |
| Threshold Voltage | 500mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| On-State Resistance | 250mOhm |
| Height | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNS1NV04DP-E Overview
The LED driver's packaged as a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of VNS1N.It has a total of 8 terminations.For operation, 8 pins are used.Maximum output current falls to 3.5A when operation criteria are met.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 8 pins.It has 250mOhm resistance.It is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 3.5A.
VNS1NV04DP-E Features
Resistance of 250mOhm
VNS1NV04DP-E Applications
There are a lot of STMicroelectronics VNS1NV04DP-E Power Switches ICs applications.
- Portable Video Game Players
- USB3.1 Power Delivery
- Hot Swaps
- Hot Swap
- Various applications equipped with buttons
- Portable Devices
- PDAs
- Hot Swap
- Hot-Swap Systems
- USB Power Distribution