VNP49N04FI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Number of Pins | 220 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated DC | 42V |
| Max Power Dissipation | 125W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Current Rating | 49A |
| Base Part Number | VNP49N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 28A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 49A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 49A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 33V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 3.8 μs |
| Output Peak Current Limit-Nom | 49A |
| Rds On (Typ) | 40m Ω (Max) |
| Drain to Source Resistance | 40mOhm |
| Turn Off Time | 24 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP49N04FI Overview
Tube is how it's packaged.In the ISOWATT-220-3 package, it is included.This LED driving board is mounted using the mounting type Through Hole.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.A lighting driver with Status Flag features is available.I believe it belongs to the VNP49N family.It contains 3 terminations.The 220 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 28A when operation criteria are met.The LED driving board is mounted in the way of Through Hole.The LED driver has a total of 3 pins.These electrical components are part of the OMNIFET?, VIPower? series.When this is the case, the output current is set to 49A.
VNP49N04FI Features
VNP49N04FI Applications
There are a lot of STMicroelectronics VNP49N04FI Power Switches ICs applications.
- USB Power Distribution
- Wireless/Networking Cards
- Wireless Headsets
- Wearable Devices
- Hot Swap
- Portable Devices
- Wireless Modem Data Cards
- Portable Music Players
- Set-top-box
- Solid State Drivers