VND5E025MKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5E025 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 43A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E025MKTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 2 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart.There is a VND5E025 family of things that it belongs to.A total of 24 terminations can be found in it.For operation, 24 pins are used.It has 1 functions.To meet the operation criteria, the maximum output current drops to 60A.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 24 pins.25mOhm resistance is present in the lighting driver.This electrical component is part of the VIPower? series.When this is the case, the output current is set to 60A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.It has a maximum current requirement of 6mA.
VND5E025MKTR-E Features
Supplied from 13V
Resistance of 25mOhm
VND5E025MKTR-E Applications
There are a lot of STMicroelectronics VND5E025MKTR-E Power Switches ICs applications.
- HDD and SSD
- USB Protection
- USB Power Distribution
- USB Ports/Hubs
- Portable Music Players
- Hard Disk Drives
- Notebook PC
- Mobile Communication Devices
- Wearable Devices
- Solid State Drivers