VND5E006ASPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerBSOP (0.370, 9.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 5mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND5E006 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 100A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 70A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 100A |
| Rds On (Typ) | 5m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5E006ASPTR-E Overview
The package is in the form of a Tape & Reel (TR).In the 16-PowerBSOP (0.370, 9.40mm Width) package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the VND5E006 family.It contains 16 terminations.The 16 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 100A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.A total of 16 pins are present on it.Currently, the LED driving board has a resistance of 5mOhm ohms.This electrical component can be found in the VIPower? series.It is set to 10A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.For its operation, a maximum current requirement of 6.5mA is required.
VND5E006ASPTR-E Features
Supplied from 13V
Resistance of 5mOhm
VND5E006ASPTR-E Applications
There are a lot of STMicroelectronics VND5E006ASPTR-E Power Switches ICs applications.
- Hard Disk Drives
- Mobile Communication Devices
- PC Cards
- Smart Phones, Feature Phones
- Solid-State Drives
- Low Voltage I/O System Power
- Solid State Drivers
- Portable GPS Device
- Set-Top Boxes
- Wireless Modem Data Cards