VN800PSTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 4.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | VN800 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Power Dissipation | 4.2W |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 700mA |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 135m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.65mm |
| Length | 5mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN800PSTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart, Status Flag features.The VN800 family consists of this type.It contains 8 terminations.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 135mOhm ohms.This electrical component is included in the VIPower? series.This case has the output current set to 700mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It has a maximum input voltage of 36V volts.The minimum input voltage is 5.5V volts.It requires a maximum current requirement of 2.6mA.A total of 1 drivers are included in this part.
VN800PSTR-E Features
Supplied from 24V
Resistance of 135mOhm
VN800PSTR-E Applications
There are a lot of STMicroelectronics VN800PSTR-E Power Switches ICs applications.
- USB Protection
- Hot Swap
- Smartphone and PDA
- Set-Top Boxes
- Hot Swaps
- Portable/Handheld Devices
- Solid-State Drives
- Portable GPS Device
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)