VN750B5TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 60W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN750 |
| Pin Count | 5 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 60W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN750B5TR-E Overview
A Tape & Reel (TR) is used to package it.The P2PAK (4 Leads + Tab) package includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.It belongs to the family VN750.As a result, there are 5 terminations.For operation, we use the 5 pins.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 6A when operation criteria are met.With a supply voltage of 13V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.A total of 5 pins are included in this LED driver.It has 60mOhm resistance.These electrical components are part of the VIPower? series.This case results in a 6A output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.The maximum current required for its operation is 3.5mA.There are 1 drivers available for this part.
VN750B5TR-E Features
Supplied from 13V
Resistance of 60mOhm
VN750B5TR-E Applications
There are a lot of STMicroelectronics VN750B5TR-E Power Switches ICs applications.
- Gaming
- PC Card Hot Swap
- Hard Disk Drives
- Smartphone and PDA
- Portable GPS Device
- Notebook and Tablet Computers
- Notebook PC
- USB Protection
- Set-top-box
- Wireless Modem Data Cards