VN5770AK-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Applications | DC Motors, General Purpose, Relays |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN5770 |
| Pin Count | 28 |
| Interface | Logic |
| Output Configuration | Half Bridge (2) |
| Output Current per Channel | 8.5A |
| Voltage - Load | 41V Max |
| Fault Protection | Current Limiting, ESD, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Turn On Time | 300 μs |
| Output Peak Current Limit-Nom | 12A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 250 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN5770AK-E Overview
In this package, Tube is used.A cost-saving measure, H bridge is included in 28-SOIC (0.295, 7.50mm Width).With the 4.5V~36V supply voltage, improved reliabilbridge drivery can be achieved.In the way of Surface Mount, H bridge circuit is mounted.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose, Relays as well.Mount the board using Surface Mount.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 28 terminations.A signal interface uses 28 pins as pronged contacts.Its base H bridge ic number, VN5770, can be used to locate other H bridge ics that are related.For the operation of the H bridge, a voltage supply of 13V is used.Electronic H-bridges of the OMNIFET II?, VIPower? series constitute this type of H-bridge.It is through 28 pins that this bridge driver is able to perform its specific functions.
VN5770AK-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN5770
VN5770AK-E Applications
There are a lot of STMicroelectronics VN5770AK-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Telecom Microprocessor
- High current, low profile DC-DC converters
- Bipolar stepper motor
- Audio-visual equipment
- High-Current DC-DC Point-of-Load Converters
- Desktop Computers
- V-Core
- VTR
- DVD players
- Non-V-Core