VN5012AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 42 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5012 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 65A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Nominal Input Voltage | 13V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 12m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN5012AK-E Overview
The LED driver's packaged as a Tube.This package is included in 24-PowerBSOP (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A lighting driver with Auto Restart features is available.The VN5012 family consists of this type.As a result, there are 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.It is important to note that the LED driving board has 2 functions.This operation requires the maximum output current to be decreased to 65A.It is possible to obtain high efficiency with a supply voltage of 13V.It is mounted in the way of Surface Mount.A total of 24 pins are included in this LED driver.It has a resistance of 12mOhm.A component of this type is included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).Normal operation requires Vsup above 4.5V.This part is powered by 8/36V.
VN5012AK-E Features
Supplied from 13V
Resistance of 12mOhm
VN5012AK-E Applications
There are a lot of STMicroelectronics VN5012AK-E Power Switches ICs applications.
- Hard Disk Drives
- Wearable Devices
- HDD and SSD
- Portable Devices
- Gaming
- Wireless Headsets
- Solid-State Drives
- Wireless Modem Data Cards
- Set-Top Boxes
- USB3.1 Power Delivery