VN31SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN31 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Output Current | 31A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 30m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN31SP Overview
It's?packaged?in?the way?of?a?Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It belongs to the family VN31.There are 10 terminations in it.The operation is performed through the 10 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 31A.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this lighting driver.10 pins are equipped with it.When this case is used, the output current is set to 31A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The LED driver is configured with a maximum supply voltage of 26V (Vsup).Normal operation requires a voltage above 5.5V for the supply voltage.
VN31SP Features
Supplied from 13V
VN31SP Applications
There are a lot of STMicroelectronics VN31SP Power Switches ICs applications.
- USB Power Distribution
- Portable Music Players
- HDD and SSD
- USB3.1 Power Delivery
- PC Card Hot Swap
- Portable Devices
- USB Ports/Hubs
- Telecom and Network Systems
- PDAs
- Portable GPS