| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 14W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN03 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 14W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 500m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN03 Overview
The LED driver's packaged as a Tube.Package Pentawatt-5 (Vertical, Bent and Staggered Leads) contains it.A Through Hole mounting is used for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Status Flag features.It is a member of the VN03 family.It consists of 5 terminations in total.The operation is performed through the 5 pins.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 4A.Supply voltages of 13V allow for high efficiency.It is mounted in the way of Through Hole.A total of 5 pins are present on it.In this case, there is 1Ohm resistance in the LED driving board.When this case is used, the output current is set to 4A.In order to optimize the efficiency of the supply voltage, it should be set to 26V.There is a maximum input voltage of 26V volts.The input voltage minimum is 5.5V volts.The maximum current required for its operation is 50mA.
VN03 Features
Supplied from 13V
Resistance of 1Ohm
VN03 Applications
There are a lot of STMicroelectronics VN03 Power Switches ICs applications.
- Wireless Headsets
- Handheld Devices
- Portable Video Game Players
- Solid State Drivers
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Low Voltage I/O System Power
- Set-top-box
- Wearable Devices
- USB Ports/Hubs