VIPER53ESP-E
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 65W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VIPER53 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 9mA |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~19V |
| Output Power | 40W |
| Control Features | EN, Frequency Control, Soft Start |
| Input Voltage (Min) | 9.3V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Breakdown | 620V |
| Voltage - Start Up | 11.5V |
| Height Seated (Max) | 3.65mm |
| Length | 9.3mm |
| Width | 7.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VIPER53ESP-E Overview
This ac to dc converter is embedded in package PowerSO-10 Exposed Bottom Pad .The AC/DC power converter type is Tube .Surface Mount mounts this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TC °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches Up to 300kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 8.4V~19V (Vcc/Vdd).In total, it has 10 terminations.There are 10 pins on the ac/dc converter.The pins of the ac-dc converter count up to 10 .There are no problem mounting the ac dc converters by Surface Mount .This AC to DC converter belongs to the VIPER? manufacturer family.The VIPER53 family can be used to search for similar acdc converters.A total of 1 outputs are available for processing.The ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 2.3A .There is 40W output power generated by a coverter.
VIPER53ESP-E Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 300kHz
With 10 pins
Output Current at 2.3A
VIPER53ESP-E Applications
There are a lot of STMicroelectronics VIPER53ESP-E AC DC Converters applications.
- Replacements for bulky plug-in transformers
- Automotive Telematics
- Tablets
- Adapters
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Cleaners
- ZigBee
- RCC SMPS
- AC?DC USB chargers for Tablets
- Standby power supplies for IR