VIPER50A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 HV (Bent and Staggered Leads) |
| Number of Pins | 5 |
| Weight | 4.535924g |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -25°C |
| Power (Watts) | 50W |
| Additional Feature | AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 60W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER50 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 12mA |
| Power Dissipation | 60W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Max Input Voltage | 230V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 13V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 50 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Max Input Voltage (AC) | 230V |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER50A-E Overview
This ac to dc converter is included in the package Pentawatt-5 HV (Bent and Staggered Leads) .In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As soon as the switching frequency reaches Up to 200kHz , the circuit is closed.It can be used within the range of 8V~15V supply voltage (Vcc/Vdd).There are a total of 5 terminations.On this ac/dc converter, there are 5 pins.A total of 5 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .It is a member of VIPER? manufacturer family.It is possible to search for similar acdc converters by using the VIPER50 family.A total of 1 outputs are to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 1.5A for the output current.There is 700V voltage output from it.As long as AC to DC converter is operated at frequency 200kHz ,it is capable of attaining high efficiency.You may read the REACH SVHC standard at No SVHC .Input voltage for the AC to DC converter is available under 230V .It is also possible to detect AUTOMATIC BURST MODE OPERATION IN STAND-BY CONDITION when utilizing this ACDC converter.A maximum supply current of 16mA can be handled by this power AC DC.A AC to DC power converter's input voltage (AC) should not exceed 230V .When 125°C is set to the maximum, the AC to DC power converter will run continuously.A minimum working temperature of -25°C must be maintained by this isolated switch.
VIPER50A-E Features
Packaged with Pentawatt-5 HV (Bent and Staggered Leads)
Switching Frequency at Up to 200kHz
With 5 pins
Output Current at 1.5A
VIPER50A-E Applications
There are a lot of STMicroelectronics VIPER50A-E AC DC Converters applications.
- Wall switches
- Adapters for Handheld Electronics
- White goods
- Chargers for cell/cordless phones
- Cleaners
- RCC SMPS
- ZigBee
- White goods
- Auxiliary Power Supply
- Low-Voltage I/O System Power