VIPER37HE
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 10-SDIP (0.300, 7.62mm) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Base Part Number | VIPER37 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 3.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 3.5mA |
| Output Power | 25W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER37HE Overview
In the package 10-SDIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.At this point, the switching frequency reaches 115kHz .A range of 8.5V~23.5V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 10 terminations.There are 10 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.You can search similar acdc converters based on VIPER37 family.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.Coverters generate 25W in terms of output power.An input voltage of less than 85V volts can be used with the AC to DC inverter.Approximately 3.5mA amps of supply current can be handled by the power AC DC.Input voltage (AC) should be below 265V .
VIPER37HE Features
Packaged with 10-SDIP (0.300, 7.62mm)
Switching Frequency at 115kHz
With 10 pins
VIPER37HE Applications
There are a lot of STMicroelectronics VIPER37HE AC DC Converters applications.
- Dimmers
- Adapters for Handheld Electronics
- Battery chargers for media tablets
- USB type-c v1.2 chargers with optional VDM
- AC?DC USB chargers for Cell Phones
- 3.3V power supplies
- Standby Power Supplies
- Switching AC-DC Adapter
- Lighting controls
- Switching AC-DC Charger