VIPER27LN
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 3.5mA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 20W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER27 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
VIPER27LN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.The AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Switching frequency reaches 60kHz Hz.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).There are a total of 7 terminations.The ac/dc converter has a total of 7 pins.There are 7 pins in the ac-dc converter.Suitable mounting is provided by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.Search similar acdc converters based on VIPER27 family members.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .The voltage output by this AC/DC converter is 800V .In the following link, you will find the REACH SVHC standard: No SVHC .Input voltage for the AC to DC converter is available under 265V .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.AC to DC converter is capable of handling a maximum supply current of 3.5mA A.
VIPER27LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 60kHz
With 7 pins
VIPER27LN Applications
There are a lot of STMicroelectronics VIPER27LN AC DC Converters applications.
- Adapter for ADSL
- Humidifier
- AC/DC Adaptors/Chargers for Cordless Phone
- Battery chargers for mobile devices with touchpad display
- Adaptors for DSCs
- Automotive Clusters
- Switching AC-DC Adapter
- Cleaners
- Chargers for cell/cordless phones
- Home Appliance Applications