VIPER27LDTR
| Parameters | |
|---|---|
| Output Current-Max | 0.74A |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Isolation | Non-Isolated |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 10mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Digi-Reel® |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | VIPER27 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 3.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
VIPER27LDTR Overview
A ac to dc converter of the package 16-SOIC (0.154, 3.90mm Width) contains the ac to dc converter.In Digi-Reel? case, the ac dc converter is available.Surface Mount mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.When the switching frequency reaches 60kHz , the process is complete.This AC/DC converter is suitable for operation in the range of 8.5V~23.5V supply voltage (Vcc/Vdd).It has a total of 16 terminations.In this ac/dc converter, there are 16 pins.There are 16 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .This AC to DC converter belongs to the VIPer? plus manufacturer family.If you select the VIPER27 family, you will be able to search similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .Ac to dc inverters can be supplied with a maximum current of 0.74A .Here is the standard for REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .It is assumed that a coverter generates 20W as its output power.It is possible to use the AC to DC inverter with an input voltage less than 85V V.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
VIPER27LDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
VIPER27LDTR Applications
There are a lot of STMicroelectronics VIPER27LDTR AC DC Converters applications.
- Replaces linear transformers
- Air conditioners
- Adapters for Handheld Electronics
- Universal input AC/DC adapters (15W - 45W)
- Battery chargers for cellular phones
- Power Adaptors
- Records
- Automotive Infotainment
- Air Conditioning
- Vacuum Cleaner