VIPER27HN
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER27 |
| Pin Count | 7 |
| Output Voltage | 800V |
| Operating Supply Voltage | 23.5V |
| Input Voltage-Nom | 14V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 3.5mA |
| Max Output Voltage | 800V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 8.26mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER27HN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Switching frequency reaches 115kHz Hz.As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~23.5V , the AC/DC converter may be used.As a result, it has a total of 7 terminations.There are 7 pins on this ac/dc converter.A total of 7 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .The AC to DC converter belongs to the manufacturer family of VIPer? plus .A similar acdc converter can be searched by using the VIPER27 family.Switching Regulator or Controllers includes the ac to dc conversions.Its output voltage amounts to 800V .This is the standard of REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The AC to DC inverter can be used with an input voltage of less than 85V V.When the supply voltage is 23.5V , the interface IC conducts.AC to DC converter is capable of handling a maximum supply current of 3.5mA A.Input voltage (AC) should be below 265V .A total of 1 channels are available.
VIPER27HN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 115kHz
With 7 pins
Operating Supply Voltage at the range of 23.5V
With 1 channels on it
VIPER27HN Applications
There are a lot of STMicroelectronics VIPER27HN AC DC Converters applications.
- Standby Power Supplies
- Switching AC-DC Charger
- Set-top boxes
- Lighting controls
- Cleaners
- AC--DC Adapter
- Z-Wave
- AC/DC Adaptors/Chargers for Cell Phones
- Air conditioners
- Wireless System